Ancient craftsmanship

Cross -stitch is a special embroidery thread and cross grid, using the method of combining with latitude and weft, and embroidery with the special coordinate pattern. Anyone can embroider the same effect of embroidery.

Cross -stitch is an ancient national embroidery and has a long history. In the daily life of many nations in China, self -made cross -stitch crafts have always been common. Due to the different cultures of various countries, over time, the development of cross stitch in various countries has also formed their own different styles. Whether it is embroidered lines, fabric colors, materials, and patterns, it is unique.

Picking flowers is a traditional Chinese traditional embroidery technology. It is widely distributed. Among them, Hubei Huangmei picks flowers earlier, most representative and influential. It dominates in the history of the development of flower picking technology in China. Therefore Representatives and collective names.

origin

Cross -stitch is a handicraft with the history of Yuanyuan. The Cross End of the 14th century AD passed from Turkey to Italy, and then spread in Europe. It was originally popular in the court, and later introduced to the people. Because it is easy to learn and understand, it will soon be widely widespread and is loved by people of different ages.

The earliest cross -stitch was embroidered on the fabric made of animal fur, and used silk threads extracted from cocoons. This kind of cross stitch was used to decorate clothes and furniture in many countries. Due to the different cultures of various countries, over time, their own styles have been gradually formed. Whether it is embroidery line, fabric color, or material, patterns, each has its own advantages.

Huangmei picking flowers, also known as “cross -stringing flowers” and “cross stitch”, originated in the Tang and Song dynasties, and became in the Ming and Qing dynasties.

In the fourteenth century, Huangmei picked flowers to Europe by Turkey. It coincided with the European Renaissance in Europe. Huangmei picked flowers and quickly swept the courts of European countries due to the simple needle method and strong performance. The continuous integration of Chinese and Western cultures has further carried forward the needle, pattern, and color of Huangmei to pick flowers in Europe. Because of the cross-needle method, Huangmei picking flowers is translated by Europe as “Cross-Stitch”, that is, cross stitch.

The global economic integration of the twentieth century caused Huangmei to pick the flowers and return to the hometown, Cross-Stitch was commonly known as “cross stitch” by Chinese consumers. “Huang Mei picks flowers” (to be tested).

develop

Cross -stitch is commonly known as “picking flowers” or “picking embroidery” in folk. The cross stitch was passed from Turkey to Italy through Turkey in the 14th century AD, and then spread in Europe. The earliest cross stitch was embroidered on the fabric of animal fur from the silk thread drawn from the cocoon. This kind of cross stitch was used to decorate clothes and furniture in many countries. Because the culture of various countries was different, it was pushed over time. , They all have their own styles. The color and material of the embroidery line and fabric are ingenious.

In the fifteenth century AD, cross -stitch began to enter the folk and gradually accepted by ordinary consumers. With the expansion of Western advantages in the world, cross stitch has been transmitted from Europe to the Americas, Africa, Oceania and Asia.

Decades ago, cross -stitch entered the Asian market and became popular in the Philippines, Malaysia, Singapore, Thailand, Indonesia, South Korea and Japan, as well as Taiwan, Hong Kong, Macau and other regions.

South Korea began to introduce cross -stitch about more than ten years ago. The cross stitch has flourished in South Korea. Since 2000, there have been about 3,000 stores operating or cross -stitching content in South Korea since 2000.

type

There are many types of cross -stitching, divided into watches, landscapes, calligraphy and painting, static objects, characters, cartoons, flowers, animals, pillows, Chinese style, religion (Muslims, mosques, Arab architectural styles), wallets, car pillows, card covers , Card bags, double -sided embroidery, three -sided embroidery, three -dimensional embroidery, mobile phone bag, Ping An, pendant, home supplies, accessories, transit embroidery series, personal photo, wedding cross stitch, etc.

The popular cross -stitch types in the market: “Qingming Shanghe Tu”, “Great Exhibition Hong Tu”, “Eight Jun Full Map”, “Qinqi Calligraphy and Calligraphy”, “Twelve Golden Bad”, “Mountains and Water Scenery Pictures” and so on.

use

From the perspective of cross -stitching, it is roughly divided into four parts: the first is clothing and clothing; the second is wearing and accessories; the third is daily necessities and home decoration; the fourth is leisure and friends.

First, clothing and clothing. In Europe, the cross stitch was all the rage in the 1970s and 1980s. In China, as early as the Dunhuang murals in the Tang Dynasty, there were “cloud shoulders”. People from high society can use (enjoy), of which the images include “Sihe Ruyi” and “Fuqing Ruyi” and so on. There are “cloud shoulders” embroidery bags, and children’s mouths.

Second, wearing jewelry. In ancient times, the decorations were divided into product categories in ancient times: lotus bags, smoke purse, fragrant lotus bags, waist lotus bags, miscellaneous treasures, fans, fan bags, Pa bags, glasses boxes, and jewelry boxes. For literati and Mo. From the meaning, there are “Lai Cambodia”, “Pinning Red”, “Listening to the Qin”, “Better”, “Butterfly Love Flowers” in “West Chamber”, are mostly love, blessing and so on. Essence

Third, daily necessities. Old curtains, “account hanging”, “pillow”, “pillow”, “picture roll” and other daily necessities. To this day, cross -stitching is the most common with cross -stitch pillows. Embroidered a pillow for the beloved, and has its own thoughts and blessings one by one. In addition to cross -stitch, there are ribbon embroidery. The famous embroidery films include “Three Sheep Kai Thai Pillow Top”, “Fisherman’s Belish”, “Xianhu Jiqing”, “Futing in front of the eyes”, “curtain floating belt” and so on. Most of the cross stitch is appreciated by a luxury.

Fourth, leisure and friends. Cross -stitch is exquisite and highly decorative effects and collective value. Embroidered friends who love cross -embroidery embroidered beautiful rolls can also be embroidered with exquisite works for friends and relatives. Cross -stitch is also an excellent way of leisure. It is suitable for all ages. Children can cultivate their hands -on ability. Adults can enrich their amateur life, Tao operates, cultivates, and relieves stress.

Common tools

The selection of needles is absolutely necessary. There are two main types of needles. One is like a long pinhole, which is suitable for small and medium -sized fine works. The other is the short -rough needle (blunt needle) that is not easy to penetrate the cloth surface. The size of the needle eye, the shape of the needle tip, and the length of the needle must be considered when choosing the needle.

In addition, there is a water -soluble pen used for cross -stitching cloth. When embroidered, it can be embroidered according to the pattern and lines of the water -soluble pen. After embroidery, wash off the color of the color with water. You can choose a pencil without a water -dissolved pen, but the pencil is not easy to wash off. After all, it is not a professional cross -stitching tool. In addition, the stringing knife used in embroidery is common. It is common to embroidery the wrong grid.

There are many specifications of cross -stitch cloth, and the size of the grid is also different:

9CT means that there are 9 grids of one inch (2.54 cm). Generally, 6 stock lines (or 4 stock lines) are embroidered, 3 stock lines are edged, and 20 stitches are embroidered;

11CT means that there are 11 grids in one inch. Generally, 4 stock lines (or 3 stock lines) are embroidered, 2 stock lines are edged, and 22 stitches are embroidered;

14CT means that there are 14 grids in one inch. Generally, 2 stocks are embroidered with 2 stock lines, 1 stock line edges, and the 24th needle embroidery;

18CT means that there are 18 grids in one inch. Generally, 2 stocks are embroidered with 2 stock lines, 1 stock line hooks, and No. 26 needle embroidery.

(Full embroidery method: 9CT cloth embroidered with 6 strands, 11CT cloth embroidered with 4 stocks; sparse embroidery method: 9CT cloth embroidered with 4 strands, 11CT cloth embroidery)

There are also optional tools: embroidery frames, stretching, wound boards, small scissors, wire removal, etc.

Special tool

古老的技艺十字绣

When embroidered multiple embroidery lines or other varieties of embroidery lines, you can also use tools to reduce conclusions. The use of tools requires a special operation, so in this case, it is recommended to use a vertical embroidery frame.

Many things can be used as a tool: a large embroidered wall -mounted needle, a small hook needle, a rolling pin, and so on.

When the needle is tied up under the embroidery cloth, gently pull the thread up, and at the same time, use those tools to wear the embroidery cloth nearby, so that the embroidery line can be flattened in parallel.

Cross stitch card machine

古老的技艺十字绣

Cross -stitch card machine, also known as cross -stitch computer card paper machine, is a dedicated CNC device for cutting and processing cross -embroidered mounting cardboard. It is mainly used for cross -stitch mounting. Cross -stitch card machine consists of a machine working platform, machine control box, head, paper press, control computer, platform cutting control software, and air compressor.

Basic material

Cross -stitch: Cross -stitch uses 6 shares of lines, 8 meters per bunch. Generally speaking, 11CT fabrics use 3 stocks embroidered, 14CT fabrics use 2 stocks embroidery. Various brands will provide color control tables.

Cross embroidery needle: The embroidered needle of the cross -stitch is very special. Long, No. 24 is a commonly used embroidered needle. In addition, there are bead needles used in beads.

Cross -stitch -specific threading board: It is pressed on a cardboard (mostly 250 grams of white card paper). The corresponding wire holes can facilitate you to distinguish the embroidery lines with similar colors during embroidery and find the line you want to embroidery. The number of holes is divided into 12 holes (double -sided embroidery), 28 holes, 30 holes, 36 holes, 40 holes, and so on.

Cross embroidery cloth: The cross -stitch embroidery cloth is grid -like, with a square eye. The domestic cloth is generally 1.5 meters wide. It can be cut according to size. After the embroidery and ironing, the effect is better. It is white, big red, black, dark blue, light blue, linen (beige), pink, and is divided into 21 yarns, 24 yarns, 30 yarns, 32 yarn and single -stock yarn (dedicated to insoles) according to the thickness. There are commonly used 9CT, 11CT, 14CT, and 18ct. There are more plastic cloths with double -sided embroidery and wallets. Most of them are 14CT. The most commonly used colors are generally red, black and beige.

Cross -stitch drawings: Cross -stitch drawings are divided into professional software to embroidered cross -stitch patterns in the form of grids. Each grid is marked with color labels. Different colors are represented by different colors. There are corresponding DMC line numbers, and these color marks are arranged with serial numbers, and the needle method is clearly indicated. The hook edges are those color labels. Basically, the embroidery method of the picture will be indicated in the drawing. Generally, every 10 cells around the drawings are named by numbers, which is convenient for the size of the estimates. Cross -stitch drawings are divided into about 2 types, one is printed by itself, and the other is printed by professional companies.

Crane -shaped scissors: It is dedicated to the cross stitch. Compared with ordinary scissors, no matter how small parts are used during use, it can be treated cleanly with crane -shaped scissors. The appearance is in line with the unique art of cross stitch.

Line box: Made of plastic, divided into three specifications of large, medium and small, mainly used for small items such as line boards, beads, needles, etc. Because of its convenient carriers, it can be stored for 20 ~ 25 thread boards.

Stretching: Although the traditional rules do not need to use embroidery stretch, the embroidery stretch can flatten the cloth and avoid the cross cloth from becoming loose. And the use of embroidery stretch is stronger than placed in your hands. You can choose to use according to the size of the work or the habit of the individual.

Pick up embroidered cloth

Overall, there are different types of cross -stitch cloth we have contacted according to different divisions:

According to the country of origin: the best is the German cloth, followed by French cloth, as well as the Olympus cloth of Japan, and Korean cloth, Thai cloth and China cloth. Of course, their price is also proportional to its quality. If in a range that can be tolerated, naturally Germany is the first choice. But for the embroidered friends who have just started cross -stitch, I suggest that it is more suitable to use Korean cloth or Chinese cloth, especially the Jeanpu in South Korea. The quality is acceptable and the price is fair.

According to the division of the grid: cross -stitch cloth can also be divided into: 32ct (count), 28CT, 18CT, 16ct, 14ct, 11ct, and 9ct 8ct. The larger the amount, the smaller the grid.

According to texture: Cross -stitch cloth can be divided into plastic cloth (mainly embroidered pendant, wallet), cotton cloth, etc.

According to color: Cross -stitch cloth mainly includes white, red, black, dark blue, light blue, linen (beige), pink.

Generally, there are no special requirements for cross -stitch cloth. They choose 11ct or 14CT cotton cloth. Of course, different works have different requirements. For example, cushion, baby bibs, etc. Due to special uses, the fabrics are relatively soft.

Many people first embroidered the cross on Aida. When their embroidery matured, they turned to embroidery on linen or other Evenweaves. Many embroidery friends are more familiar with how to embroider on fine linen. In fact, this is completely personal choice, and many skilled embroidery like AIDA.

Evenweave refers to fabrics with the same number of spinning mackerel in the same length, perhaps the thickness of each yarn is not uniform -this can be clearly seen from the linen cloth It must be the same.

Embroidery cross -stitch on Aida is embroidered in a square. On the linen or other Evenweaves, because there is no small square grid, it is usually two gauze embroidery across the cloth. This means that 28Count’s linen and 14Count’s aida, the size of the embroidered works is the same.

Everyone feels that AIDA is far stronger than Evenweaves fabrics. This cannot be said that Evenweaves is good or bad, and it is determined by personal preferences. And the hard and hard of embroidered cloth does not affect the use of flowers or embroidery frames.

古老的技艺十字绣

When embroidered 1/4 and 3/4 pins, Evenweaves fully reflects its superiority. When two types of needle methods are embroidered on AIDA, we need to tie the needle through the middle of a small square grid, and sometimes we have to use a thin needle, such as No. 26 or even 28th needles. Embroidery on Evenweaves, just pass through the strokes between the two embroidered cloths, and it does not need to be laborious at all.

In addition, some people think that they can see the hole more clearly on Evenweaves, but some people think that Aida is easier.

Various embroidery comparison

DMC cross stitch cloth

The side is the kind of square blue edge posted upstairs. The eyes are large and square, and it feels a bit numb (all cotton slurry). The feel is thin. The four cotton yarn is thin and the tightness is not strong. The embroidered fabric feels soft. It can be used for two cloths (when the bottom cloth or waste cloth).

DMC cross stitch cloth, positive grid, strong feel, good quality, high cost performance.

German cross stitch cloth

古老的技艺十字绣

On the side is the small square orange edge, the hole eyes are smaller than DMC, it feels thicker, a bit slightly silk or polyester, the hardness is not strong in DMC. The four cotton yarn is slightly thicker and strong. After embroidery, the materials feel soft.

Korean cross stitch cloth

By the sidelines, the wavy black side, between the dmc and the German cloth, it feels thinner and soft. Due to the advantages of the entry price, more operators enter this cloth.

Domestic cross stitch cloth

At the side is the white edge of the wavy blue edge, it feels soft, but the cotton yarn is thick, and people with better embroidery can use it to make cushions and other household goods. Not suitable for mounting paintings, and the cloth surface is easy to start with hair balls. Beginners use it well.

Italian fabric

It just appeared in China, which is a bit similar to the chemical fiber fabric of CC, but its cotton -containing ratio is about 8: 2 (cotton: unknown fibers). This kind of fabric hole and grid are square. The artistic requirements are not high, and the small hands will not make the cave’s eyes change. It is a textile method with three yarns and three yarns below. The textile is tight. After embroidery, it will also become soft, but the hardness is stronger than other fabrics. It is the selection of embroidered mounting (especially large maps). The disadvantage is that the price is even higher than the German cloth, and it is a bit grinding for the embroidery line.

Cotton

Open cotton cloth is a kind of fabric without edge, which can sew it on ordinary cloth for cross stitch! For example, the fabric of cloth difficulty can also be used to use this mesh cotton cloth!

Plastic embroide

Cross -stitch plastic embroidery cloth, also known as Teslin or square cloth, is mainly used for embroidered cards, double -sided embroidered mobile phones, card bags, wallets and other practical products. Commonly used are 14CT and 18CT embroidery cloth.

Embroide cloth conversion method

First of all, you must understand the CT in the embroidery cloth specifications. CT is an embroidered cloth specification unit. The translation is a grid/inch, and 14ct is 14 grids.

PS. DMC embroidery cloth and some other European standard fabrics use PTS/CM means grid/cm 5.5 PTS/cm is 5.5 grid/cm

1 -inch = 2.54 cm 5.5*2.54 = 13.97 So 5.5 PTS/CM is 14ct

古老的技艺十字绣

If you know the unit of embroidery, you can know how to calculate the size of the embroidery cloth. The formula is as follows:

The net size of the embroidered cloth (cm) = the number of grids of the pattern / CT number x 2.54

The result of the formula is the net size of the pattern. We need to add the size of the sideways to the side of the cut and purchase fabrics. Calculating it in 5 in each side is the net size+10 cm.

Cutting dimension calculation formula

The size of the embroidered cloth pattern (centimeter) = the number of grids of the pattern / CT number x 2.54 +10

In this way, the width (W) and high (h) of the pattern can be completed.

The formula above is more bite. We can remember this way

Embroidery cloth centimeter = mesh number multiplied by 2.54 divide by CT number+

Select Embroide

古老的技艺十字绣

Generally speaking, the category and line number of the embroidery line will be marked on the regular embroidery map. In addition to the embroidery, the half -finished bag will even provide embroidered car pillows. But sometimes embroidered friends still want to choose the line that they love. Let’s discuss all kinds of situations that need to choose the embroidery line by yourself.

Situation 1: The quality of the embroidery line in semi -finished packaging is not good. This situation often occurs. For example, in the embroidery packaging bought from street hawkers, the quality of the embroidery line is very poor, and the color is not correct or incomplete. In better cases, the drawings inside indicate the sign and color number of the required embroidery lines. We can buy the embroidery lines ourselves. But this situation is not often encountered, most of the time, only the order of embroidery lines is marked on the drawing. At this time, we can only find the color cards of all the color of the well -known brand of embroidery thread as much as possible, such as DMC or Anchor, preferably a color card with actual embroidery line samples. Then you can compare the color of the embroidery line and drawing as much as possible to find the most appropriate color number. When comparing the color, it should be under the natural light outside. After finding, you can mark the color number on the drawing. If you can’t find a color card, you have to get the embroidery line in the packaging to the nearby cross -stitch shop, where there are generally brand -name embroidery lines for comparison. Note that the lights in some stores may not be suitable, which will make the embroidery line color distorted.

Situation 2: You want to use the color number of two or more brand lines on the embroidered threads of another brand marked with the brand on the drawing. If there is no line number you can buy on the drawing, you should find a color number conversion table.

Situation 3: You designed a embroidered picture yourself, or you want to change the effect of a certain embroidery picture. If your experience is very rich, you can design embroidery drawings without using software such as pcstitch, then you will definitely choose the embroidery line. In addition to DMC cotton embroidery lines, you can use different types of embroidery threads that can be bought, such as metal wires or hand -dye wire. The choice of lines must also be considered for the final purpose, such as when embroidered the babies or clothes for the baby, do not use the silk thread that is easy to fade, or the hard metal wire.

Situation 4: You are not satisfied with the embroidery line on the embroidery map. If you want to use different colors, if the embroidery map is simple geometric figure or a simple picture without shadows, it does not matter if you use your favorite color. But if it is a complex drawing, pay more attention to spend more attention. The color set recommended on the drawings is the same as the color set of the new line you want to use to ensure that they are the same. The specific method is to put these wires under red glass or transparent color paper, filter off the mixed colors, find the same color; or compare the two lines into black and white photos (Photoshop software can convert color pictures into black and white pictures) Essence

Attachment: Since we are discussing the “embroidery line”, we must not help but mention what is the “Z” shape winding and what is the “S” shaped winding.

The explanation of Noeline MC Caughan is as follows:

古老的技艺十字绣

In order to make the embroidery line neat, we can use the “Z” shape or “S” shape to wrap the thread. Get a (6 embroidery line) line. If the line is twisted from the right side of the top to the left side, we call this line “Z” shape winding; if the line is twisted from the left side of the bottom, it becomes a “S” shape.

Select embroidered needle

The cross -stitching needle is a special needle, the pin tip is blunt, and the needle eye is large, which is greater than the normal needle. The blunt tip will not tie the embroidery line during the embroidery process. The cross -stitching needle has different lengths. The larger the number, the smaller the needle. Generally speaking, there are needles 22, 24, 26 and 28. Under normal circumstances, 14Count or small embroidery cloth uses No. 22 needles, 16-18Count embroidered cloth uses the embroidered needle of No. 24 or 26, and the No. 28 needle is suitable for embroidered cloth above 18Count. The embroidery needle should be enough to move a fiber on the embroidery cloth slightly, so as to prevent the embroidered thread from knotting or rubbing too much during the process of crossing and hurting the embroidery line.

The choice of needles also take into account the thickness of the embroidery line and the number of shares used.

10,000 kinds of return, just use your favorite needle number.

The use time is long, and the painted paint on the needle will fall off, so that it is not good -looking, and the other is difficult to use the needle. Need to change a new needle. There are some specially treated stitches, which are plated or platinum on the surface, which will be more expensive, but it can be used for a long time. You can choose your favorite needle.

The cushion of the armchair is very suitable for pins, but then it will make your family feel inconvenient, or let them see that you don’t want to let them know your embroidery utensils. Therefore, you can use a sponge pad special needle, and the magnetic needle box is also good.

Fixed embroidery line color

Generally speaking, embroidery lines are not discolored. However, some people will be very cautious when they embroidered dark colors or want to keep it for a long time, hoping to further ensure that the color of the line will not be contaminated or other embroidery lines.

The specific method is as follows:

1. Take the line from the winding board.

2. Each embroidery line is separated and placed in several distilled water virtue containers containing cold water or room temperature. Some people recommend adding some white vinegar or salt, but for certain types of or color lines, vinegar or salt may be ups and downs, so it is recommended to use it with caution.

3. Wash in distilled water.

4. If the color of the water is unclear, change the water again and then rinse until the water becomes clear.

5. Put the line on a white paper towel to dry. The color of the embroidery line should not be stained on the paper towel. If there is a color on the paper towel, clean it again.

6. Prepare the embroidery cloth.

The content mentioned below is the most conservative and stable processing method. It is not a bad thing to pay attention to the matters that may need to be paid in advance in advance. You can still maintain your original embroidery habits according to your own preferences, or you can choose a place where you feel reasonable.

1. Before embroidery, remove the border on the embroidery cloth. Because the tight striking edge will affect the texture and shape of the cloth, and then affect the embroidery.

2. It is also recommended to retain the edge, because the bonding can play a protective role when using the embroidery frame.

3. Make sure that the count of embroidered cloth is the correct value you need. How to determine it? A one -inch length (about 2.54 cm), counting the number of small squares (AIDA) or the number of fibers (Evenweaves). If there is an error in the size, you need to adjust the size of the embroidery cloth according to the size indicated on the drawing. For example, the drawing shows the embroidery cloth of 32Count. The linen cloth in your hand is only 30Count, then you have to re -calculate the amount of cloth according to the drawing. At this time, a piece of cloth is more needed than the cloth.

4. The size of the embroidery cloth is cut into the size. The target on the drawing is mostly the size of the design. On this basis, you need to leave 5 to 10 cm on the outer side of each side.

5. Rinse a dark or red embroidered cloth again to ensure that the color is not dropped. Of course, if you are sure that the embroidery cloth will not be discolored, you don’t need to rinse repeatedly.

6. If there are creases on the embroidery cloth, try to flatten the creases, or ensure that you can be ironed in the future.

7. Handle the edge of the embroidery cloth. The specific choice is as follows:

Use the loose edge of the code to lock the edge of the embroidery cloth, and use the lining on the edge of the code, fold the side of the embroidered cloth by hand, wrap the embroidered side side by hand, use the tape that protects the embroidered cloth, the tape that protects the embroidered cloth Stick up. In this way, the four sides of the fabric must be cut about two centimeters on each side. Because the tape has chemicals to pollute the cloth, those contaminated parts should be cut off in the future. Regardless of it! Let the fabric go freely. Many fabrics will only loosen a few fibers on the side, which will not affect the size of the fabric. So, if the loose fibers taken off do not affect the operation, let them go.

Embroide

A generally accepted point of view saying that if you embroidery on AIDA, you need to use flowers; if you embroidered on linen, you can’t use it, so you have to support it with your hands. However, in the real process, many people have their own hobbies. Some people who like to keep their embroidery are neatly neatly embroidered with round flowers, and choose square embroidery frames to avoid damage to the embroidery cloth or leave marks that cannot be removed. If you already like to use flowers to support the seeds, then despite using it; if you feel that you can master the elasticity of the embroidery line with your hands, then you don’t need to force yourself to change.

The benefits of no embroidery frame:

The operation of embroidery is like sewing clothes. It does not require too much wrist exercise, and it is much faster. There is no need to worry about leaving traces of embroidery frame on the embroidery. The volume is small, there is no embroidery rack or a flower supporting son to occupy the place, carry lightweight. Some people like the feeling of embroidered cloth in their hands, which is also a very important pleasure to do cross -stitch.

The benefits of using embroidery frames:

The embroidery rack can tighten the embroidery cloth to flatten it. The embroidery frame can also be stuled not to use the embroidery so as to use the method of stitching clothes. The use of embroidery can make the progress of the embroidery at a glance without stopping. There are two types of embroidery frames. The vertical embroidery can be embroidered with two hand, one is on the embroidery cloth below. The fine workmanship is also a very beautiful furniture. Even the unfinished embroidery has a very atmosphere of the home. For some people who are difficult to hold embroidery for a long time, vertical embroidery is the best choice, because the embroidery frame reduces the pressure of ligaments, joints and muscles, especially suitable for older embroidery friends.

Embroide

Generally speaking, the embroidery line should be cut into about 50 cm. The metal line or other rough lines should be cut shorter to avoid excessive wear of the embroidery line. When using the embroidery line, you should first separate each embroidery thread and then twist them together. This can reduce the probability of twisting the line together or knotting, and then flatten the embroidery. When a stream of embroidery line is divided from a few lines, pinch the top of all embroidery threads with your thumb and index finger, and hold one end of the other thumb and index finger and pull it up. At this time, it seems that a few embroidery lines seem to form a knot. Don’t worry, there is no problem. After pulling out the required lines, the remaining lines will restore the original shape immediately. How many lines?

Under normal circumstances, some embroidery fabrics will be exposed in the design of the cross -stitching pattern, but some people like full embroidery. A few lines of embroidery depends largely on personal preferences. Generally speaking, the cloth of 14Count uses two or three embroidery lines; two shares of 18Count’s cloth;

11Count uses three or four embroidery lines. In order to find your favorite effect, you can try to embroider a few shots on the embroidery cloth and then remove it.

古老的技艺十字绣

Embroidery strategy

Where to start embroidery

The embroidery map should be in the center of the embroidery cloth. Fold the embroidery cloth horizontally and vertically to find the cross point. This is the center point of the embroidery cloth. Put a needle, or pass through a line, or embroidered a needle to mark it. Here, the center of the work has been found.

Precautions:

1. Some designs can clearly see where to start embroidery.

2. Start from the middle. This can ensure that all future work will not deviate from the center. And in many designs, the middle part is generally the most attractive part of the design.

3. The direction of the needle also determines the starting point. Try to put the needle from a hole that can be worn by a small embroidery thread, and stretch it through the holes where there are more embroidery threads.

How to use embroide

Strong recommendation: Don’t knot the embroidery line! Only in a very different case, such as an isolated needle, there is no other needle nearby, and in order not to loosen the thread, can it be knotted.

Here are some of the disadvantages of knots:

1. The knot on the embroidery line will produce a protrusion later, which will affect the image of the previous embroidery.

2. During the embroidery process, the line will trip over.

古老的技艺十字绣

3. Because the knot does not have the ability to tease, it will distort the embroidery cloth.

4. If the embroidered cloth fiber is very loose, the knot may be drilled from the front of the embroidery.

5. If the embroidery process is wrong, it is difficult to remove it, and it will also affect the demolition of other lines.

6. The end of the embroidery looks messy. Under normal circumstances, the embroidery should be relatively neat and refreshing.

So what should I do? There are several methods below to choose from, and appropriate methods are taken according to different situations.

Pass from the line.

If you start embroidered from the right side of the existing needle, then pass the line through four or five stitches on the back.

For the sake of insurance, you can turn around in the third needle and make the line around the needle, so that you can lock firmly.

Sometimes, using this method, the dark line is displayed over the light -colored embroidery cloth. If at this time, it is best not to use this method.

Sometimes the needle method on the back of the embroidery cloth is vertical, so change another method. You can pass through between lines, or around the circle. Start a new line in this way to make the back of the embroidery look very neat.

Winding of folding coils

古老的技艺十字绣

Generally speaking, this method is applicable to the even line. For example, the two lines, take an arbitrary long line, fold the folding side, pass through the pinhole, pull it over, until the disconnected side is close to the pinhole and folds the side of the needle. Began to embroider the first needle up, and the folded side should be loosely pulled behind the cloth. Then insert the needle from the front of the embroidery cloth, pass the needle through the middle of the pair of folding lines, and carefully tailor the line and flatten the cloth.

Some people who are accustomed to using this method can even cope with embroidery lines that are not even.

A person named Jim Cripwell describes the following:

The interception of a section is twice as long as the required line, which is folded. Another interception of a line that needs to be required, put one side with the long line -to -one -to -side side, but longer than the comparison line. This short -term will look shorter. Like the coil around, pull the three -strand line through the coil. Loose the needle from the line, and put on the short -term near the coil, and pass it through the other lines, but do not cut off. Be careful to pull the short -term until the side is buried online. Then re -wear three lines to start embroidery normally.

Cope

No knot “abandoned knot”

Start with a needle from the embroidery cloth. At two centimeters to five centimeters from the need to embroidery, put the needle down and leave a tail of the thread. Leave a tail on the cloth surface, and a line can be pulled out behind the cloth. The path of this line is the direction you will be embroidered, that is, your future needle line will press this cut line. After a few shots, you can pull the tail on the cloth to behind the cloth. If necessary, you can make up the first way.

This method is similar to the “non -knotted abandoned knot” mentioned above. The difference is that the tails left on the cloth surface are knotted.

The knot on the cloth can be used as a small mark in the process of embroidery. This knot can be cut in the future.

Far -away waste

This method is similar to the “abandoned knot” mentioned above. The difference is that the tail tail left on the cloth surface is far from the need for the tail of the lines, so that it will not be affected by other thread embroidery nearby. It will be cut off after the same knot.

Embroidery cross (that is, x)

There is a very important thing in the rules of cross -stitching, that is, the two cross lines in all small squares must be the same direction, that is, whether “/” is pressed on “” in one square, whether “” Pressing “/” must be the same. The only exception is the special needle method 3/4.

The traditional embroidery method is to complete the X in a grid and then embroidery the next grid.

Another one called “Danish technique” is the first half of the direction, and then come back to embroidery the other half.

Full needle embroidery

Most people use the above two methods at the same time. When a certain line on the drawing has many connected areas, Danish techniques can be used, and those sparse places are suitable for traditional stimulation. In addition, there is a more formal method that uses Danish techniques when embroidered, and the traditional embroidery method is used when embroidered. In this way, the line on the back of the embroidery can also maintain vertical direction.

We know that most of the time to save well -preserved cross -stitch works are mostly using traditional techniques embroidery. This is because each time you complete one X to complete the next X, it will keep the embroidery cloth compact. At the same time Not easy to loosen. Especially when using a line of embroidery, the traditional embroidery method can make the work even more perfect than using two lines.

Of course, everyone knows that the Danish technology method is faster, and it can also see where the embroidery is more obvious.

You can choose the method you like yourself, it is best to choose one that can make the back of the embroidery refreshing and tidy.尽管绣品背面是否整洁并不影响正面成品的样子,但总有好处,比如背面线多是纵向走的,如果横向拉的线过多,容易影响以后绣品的保存,因为那些横线会让Ferture of embroidery.

Special needle

Special needle method has 1/4 needle, 1/2 needle and 3/4 needle. Most of the 1/4 stitches and 1/2 stitches are used in the corner part of the pattern, making the pattern look smoother. The 1/2 needle is mostly used in the background of the sky, making the pattern look less heavy.

In the figure below, the two above are all -needles and 3/4 stitches, and the two below are 1/2 stitches and 1/4 needle.

1/4 needles and 3/4 stitches on linenweave embroidery are much easier than embroidered on AIDA. When embroidered on AIDA, the middle of a small square must be pierced with a needle tip. At this time, it is best to choose a thin needle, such as No. 26 or 28. There is no need to pierce the fiber in linen cloth, as long as you pass through one fiber instead of two pieces of the whole needle.

When embroidered 1/4 needle, put the needle from a corner of the small square to the embroidery cloth, and then penetrate the embroidery cloth from the middle of the square. When embroidered 3/4, generally embroidered that 1/4 needle, and then supplemented with 1/2 stitch.

Note that the previous article should be consistent with all X direction requirements, but the long side of the 3/4 needle does not have a fixed direction, and it is completely according to the design of the drawings. Then add that short 1/4 needle to achieve the perfect effect.

It is very common that the 1/4 needle and 3/4 needle appear at the same time in a small square. So which one is embroidered first? Especially when these two needle methods use the same color (such as the “horse” provided by the old lady), how to judge which one is 1/4 needle and which one is 3/4?

Of course you can decide yourself. But there are several different methods below, each with its own benefits.

If there is a stitch through this grid, then two stitches of two stitches, and then pass through from them from the edge of the hook.

When the two lines are different, the main color is the main color of the background color, and the prospect color is embroidered to 3/4.

If both colors are not prospects, it doesn’t matter which one -/4 stitches embroidered. Embroidery 1/4 needle first, and then embroidery for 3/4 needles when returning.

Embroidery two stitches 3/4 needles.

Some design drawings should embroidery a large area into 1/2 stitches. But sometimes the drawing is not clearly marked on which direction should 1/2 stitches be embroidered in which direction, then you can decide yourself. Some people naturally designate the direction of the needle under the whole needle embroidery. Sometimes, in order to make this 1/2 needle area more perfectly integrated into the background, the direction can be set as the direction of the needle in the whole needle embroidery. Determine which direction should be embroidered, and it depends on the design. For example, if the feathers on a wings are 1/2 needle, then you must set the half -needle towards the direction of the wings.

Behind

In the process of embroidery, it is inevitable to bring a small line on the back of the embroidery. At this time, you can only bring a short distance. For example, you have three grids on AIDA, or the distance with four fibers on the linen cloth. No matter how long it grows.

If the space between the two unconnected areas is already embroidered, then the line can be brought farther. How far can it be? This should be determined according to the depth of the line color. Because the thread to be taken must be under the back of the embroidered cloth with an embroidered needle (you can’t let the line cross the distance out of thin air), and the dark line of color will appear in front of the light -colored embroidery, so No. It is recommended not to exceed the distance of five or six stitches.

Plan well how to embroidery, do not let the two stitches with the same color be too far away.

Cross stitch

However, if there are some colors in the drawings, what should I do if they are far away from each other? For example, the six petals of the snowflakes are scattered and opened, and the distance is far away. The request on the drawing is to embroider three white lines on the dark cloth. The white line will be revealed behind the embroidery cloth.

Use a line to embroider the under -needle three times, so that you have 1/2 stitches of a three -strand line. Complete the full needle. When you go to embroidery the full white needle, you only pass through the back of the embroidery cloth with a thin white line. The front of the embroidery cloth will not be revealed, at least not as obvious as the three -strand line.

If you want to find a small shortcut, it is recommended to use it. Sometimes this method is better. Use a line to embroider a needle in the above method. Leave a slightly longer line and cut off. Put the two thread heads and cut them away. The knot of a line will not be very large, so there will be a pimple in front.

How to end the embroidery line

When a section of the embroidery line is used up, or to cut off, the processing method is basically the same as the “passing below” method in the “Start of a Section of Embroidery”.

One thing must be emphasized again: Don’t knot it!

Hook

Hook must be done after all cross stitch is completed. The drawing will show a few lines of hooks, and most of them use a line.

The method of starting and ending a section of the edge is like a normal embroidery method. For details, see 10 and 14.

The hook can be from left to right, from right to left, from top to bottom, from bottom to top, and even the direction of diagonal diagonal. How to go according to the design of the pattern. This is the way from left to right (odd number indicates that the needle is put on the embroidered cloth, and the number indicates that the needle is tied down):

When the edge of the hook corner, in order not to leave a diagonal line on the back, it is necessary to follow the method below (the odd number indicates that the needle will put it on the underxial cloth from the embroidery cloth, and the number indicates that the needle is pierced):

Some people like to walk on the edge of the side twice. The first pass through the outline, the effect is as follows:

Then come back and add the gap:

In order to avoid the use of this method, the edge of this method does not look straight, and pay more attention to adjustment when walking back. As shown in the figure below, 7 indicates that the needle is put on under the embroidery cloth, and 8 means tie the needle. Note that in 7 places, the needle should be worn out of the existing segment 56. In 8, the needle should be pierced from the line 34.

Anti -embroidered line twist

Before use, pull the embroidery line one by one, and then use the two embroidery lines together. See 7 for the specific method. This reduces the distortion brought by the line itself, reduces the conclusion, and makes the embroidery look flat.

Another method is to pass each embroidery thread through a wet sponge before use, which can also make the line smooth and smooth. Note that some embroidery threads cannot be wet, such as silk threads.

If you are an experienced person, you should be able to see which direction of the embroidery line distorted in which direction, and rotate the line in the opposite direction with your fingers to reduce the twist.

From time to time, the needle and line are suspended from time to time, so that the twist on the line will be unlocked automatically.

Railway

One method is called “rail”, which can avoid twisting of the line. When a needle of the embroidery X, pull all the lines to the embroidered cloth surface, then point the needle tip to the middle of the front needle, tie it in the needle, and then embroidery. The small black dot shows the place where the needle is about to be tied.

If you don’t understand the above explanation, then Martha Beth Lewis has another simple and easy -to -understand method:

———- 3 ——– 2–1

Assuming that in the three numbers shown above, you need to tie the needle from 2. Don’t do it first.

Get the needle tip to 1. Pull all the embroidery lines to the surface of the embroidery cloth. Put one finger in 3 places. Pulling the embroidery line from 1 to 3 and tied the fingers under 3 places. At this time, the two embroidery threads should be passed through 2 o’clock. It seems that the two embroidery lines are like two parallel chopsticks, and 2 points are a peanut rice sandwiched in the middle of the chopsticks.

The fingers on the three places still pressed the line and pierced the needle from the middle of the two embroidery lines. Raise 3 fingers. Pull line. This embroidery line is very flat.

The railway techniques should be traveled as much as possible, reducing the chance of conclusion. If you do not use railway techniques, the online twisting may be passed down from the head to the end of the line, so the needles and lines must be drooped in the air to let them roll the embroidery thread by themselves to reduce the twisting.

古老的技艺十字绣

Railway techniques can also flatten the surface of the embroidery and reduce dew. The flat embroidery line will reflect the sun to the greatest extent to make the embroidery look bright.

The railway technique is more time -consuming, so some people usually use them.

Common cross embroidery methods include: double -sided embroidery, eyebrow embroidery, chain embroidery, broken embroidery, flying embroidery, feather embroidery, petal embroidery, back embroidery, Crean embroidery, cross stitch, French knot.

Double -sided embroidery

Step 1: When embroidered after embroidery, pay attention to the place where the PP cotton is installed is relatively flat. Do not leave the opening in a round or more teeth.

古老的技艺十字绣

Step 2: PP cotton must be stuffed with a pointed thing, so that the drums are good -looking.

Step 3: The cross -stitching thread on the side of the seam is used for double -sided embroidery that was originally black. Essence

Step 4: There is no special accessories on hand. You can cut a small piece of plastic cross -stitch cloth for double -sided embroidery nose. When sutured double -sided embroidery, you can embroidered together on the double -sided embroidery.

Full needle embroidery

First put it on from the Eyes 1, then wear it from the Internet Eye 2, then wear it from the Eyes 3, then wear it from the Internet eye 4, then put it on the Internet Eye 5, then from the Internet Eye 2, and then from the Internet Eye 3, and then from the Internet Eye 6 Go down, so on.

Semi -embroidery method

Half -needle embroidery is a diagonal, that is, half of the whole needle embroidery.

One -quarter embroidery method

1/4 of the needle embroidery is composed of half of the diagonal line. If the remaining part of the square is required and the performance is different, there is a one -/4 needle embroidery to express.

3/4 embroidery method

The 3/4 embroidery is the shape of a “human” character that is composed of a complete diagonal and half diagonal line.

Backstroke

The first needle is from the Eye 1 of the Net, and then from the Internet Eye 2; the second needle is from the Eye 3 of the Net, and then from the Internet Eye 2, and then from the Internet Eye 4 to the Internet Eye 3. Except for the first needle, the rest of each needle is Back to the eyes of the original mesh by pins. Reviser is generally used for embroidery across the line, contour, and letters.

古老的技艺十字绣

Frank

Put the needle to the position 1, turn the thread around the needle, and insert the needle in the position of 2. Hold the end of the embroidery line with a finger without embroidery, tighten the knot, and then pass the needle through the fabric and hold the embroidery line until it must be released. If you make a big knot, you can increase the number of stocks appropriately, but only once.

Flat petals

Pass the needle from the position of 1, turn the line back, then put the needle from 1, from 2, and press the line to tighten the line into a petals. Many rules, the most important one, is a self -entertainment activity. You can embroidery according to your preferences. There is no need to comply with any rules, including everything you will write later.

Fast embroidery

Ordinary method. In general, the following half of the needle requires the following steps: 1. Pat. 2. Go down. 3. Pull the line. 4, needle up. 5. Come on. 6. Pull the line.

Pick up embroidery. Picking embroidery is to omit the second and third steps in the above steps. After the needle is up, do not change your hands, and directly take the needle out of the needle. Then save Step 5. The speed of picking embroidery is fast. The disadvantage of picking embroidery is that the pin is not neat enough.

1. Pick up embroidery. Picking embroidery is a well -deserved king of cross embroidery. Picking embroidery is to omit the second and third steps in the steps above. After the needle is up, do not change your hands, and directly take the needle out of the needle. Then save Step 5. The speed of picking embroidery is absolutely more than doubled. But the disadvantage of embroidery is also obvious. The most regrettable is that the pin is not neat enough. If you have the patience to pull it with your hands when you are not uniform, you can see it in the past. There are also use of embroidery when it is only suitable for embroidered slices. The scattered needle is more troublesome and easy to embroidered because it is necessary to calculate the needle out of the needle. And it is even more powerless to the color with only a few stitches.

2. One hand, one. When not using the embroidery frame, the most common method is to use heavy objects (the box is the best choice) to press the ends of the embroidery cloth on the table. Use the hand to gently hold the embroidered cloth when embroidered. The line head is also very convenient. As for which hand is on it, it doesn’t matter. The problem of pulling the line can be pulled in multiple or twice (with the double -headed needle, it can really be seamlessly said), two times the one to pay attention to is that the line should be on it when pulling the line. If you are online When it is pulled below, it is easy to twist the lines together because of invisible.

3. Comprehensive method. What is the comprehensive method? In fact, it is a matter of use, and it is suitable to use that method to use that method. It is recommended that the right hand is on it, so that you can use the embroidery directly without changing your hands in a place that is suitable for embroidery. When the color of the embroidery is embroidered, I usually like to use the half -needle under the embroidery embroidery, and then use the one -handed method to embroidered the half needles on it, so that it can be fast and good.

4. Do not pull a long distance on the cross line on the back. Some people are afraid of changing lines, and often pull a color line on the back of the cross -stitching map. After embroidered by a picture, you can only look at the front, and the back is terrible. In fact, this method is not desirable. One is because it is a waste of line, but because it will be ugly when mounting. When embroidered, usually more than 4 square meters, the cross stitch thread is pressed from the back, cut off, and then embroidered at the beginning, so that the cross -stitch finished products will be much more beautiful.

Needle and need

Take a 1 -meter -long embroidery thread when you start the needle and use the needle to wear the needle, so that you can leave a ring. You can not need to receive the needle when you finish this line. Pass in the ring, and then continue to embroidery with the needle. Although the speed is not much improved, it can save once and the needle, which is convenient and saved. It is recommended to use sisters. Especially when the golden line is embroidered, this method is strongly recommended, and it must be knotted on the two ends of the second line, so that the golden line will not spread, nor can it be pulled. The line is embroidered, and there is no need to cut it, and it will not be wasted.

Mixed embroidery

There are generally two color numbers (or serial numbers) behind the symbols of mixed embroidery. Depending on the specifications of the cloth used, the number of embroidery line shares is also different.

When the two strokes are embroidered with 2 strokes of the small grid (14ct), one of the two color lines marked is used to embroidery together.

When the 3 -stroke of the Zhongge cloth (11CT) embroidered the full needle, use 2 shares of the previous color line, and the second color line is used for the embroidery.

古老的技艺十字绣

Full vertical embroidery

Cross -stroke back vertical tutorial (illustration teaching)

Mastering the method carefully embroidered, you can still embroidery to the back of the back. If it is a novice, you can slowly learn to the back of the cross -stitching back. The illustration is clear and easy to get started. At the same time, there are three points of backward embroidery method to remember:

1. The noodle needle is , starting from the lower left or upper right corner; the face is//from the upper left corner or from the lower right corner;

2. First embroidery 相 connected to the left and right, and after the embroidery, come back to the embroidery;

3. Cross -embroidery connected to the diagonal, after repairing the head to embroidery, when you encounter the embroidered acupuncture , passed between “/” and cloth, and keep the direction of the face needle .

Let’s first learn the cross -stitching method of the simple example of the example. The first one is the full embroidery method on the back of the horizontal connection, and then the vertical connection and diagonal type.

First, horizontal cross -stitch back embroidery method: This is the most special horizontal connection, and the most typical example. As shown above, start from 1, complete the first half of each needle according to the direction of the red arrow, and then go back to the rear half of the needle after 10. The finished product is as follows. Operation according to the instructions above, you will find that the back is full after embroidery.

Second, the vertical cross -stitching back embroidery method: The vertical connection is the same as the horizontal connection, which is also very typical. In order to increase the difficulty and better learn, we give us an example. One picture and two pictures are typical vertical connectors, and in the subsequent derivatives, we can see that one of them is jumping. The jumping needle is used to bring the vertical significance very much and it is often used. The finished product and renderings are as above. According to the above instruction steps, learning is also very simple.

Third, diagonal cross -stitch back embroidery method: Our goal is to complete the diagonal line, follow the direction of the red arrow, follow the numbers, and go back to continue walking in the direction of the red arrow in the picture In the 7th and 9th half, the two half needles need to be worn between the black line (the first half of the needle) and the cloth, and the direction of the line is consistent.

Four or four-corner cross-stitching back tutorials: This looks more complicated, and use text description: 1 red-2 red-2 blue-3 red-1 blue-4 red-4 blue (completed).

古老的技艺十字绣

Fifth, jump-type cross-stitched back vertical tutorial: Similarly, this is also explained by text, 1 red-1 blue-2 red-3 red-4 red-4 blue-3 blue (complete).

Six, branch type

Seven, network shape

General cleaning

The

1. You can put the embroidered cross -stitch pillow jacket directly in the cotton in clear water with detergent.

2. After rinse a lot of water, drip the work to drip water (you cannot expose in the sun);

3. The dry pillow cover will be wrinkled and uneven. We can use an iron to iron the embroidery, but pay attention to mastering the temperature to avoid ironing the embroidery.

古老的技艺十字绣

Best cleaning:

1. Put the embroidered cross embroidery cloth in the deserted water for 3 minutes.

2. Pour into a bottle of about 20 ml of laundry liquid and dilute it with water according to the proportion (1:30).

3. Put the embroidery from cold water into the diluted laundry fluid and soak for about 10 minutes.

4. Rub properly on the stains, but the intensity should not be too large.

古老的技艺十字绣

5. After rinse over the water, hang it directly in the ventilation and drip water.

6. After drying, just roll up the embroidery, you can mount it without ironing! Exempted ironing, save you multiple costs, troubles, and worry (afraid of ironing).

Mounting technique

The mounting in the cross -stitch does not play a decisive role, but the appropriate mounting can make a cross -stitch unique and novel. It can not only improve the art taste of cross -stitch, but also play a finishing touch, which can set off the art effect of cross -stitch. If you don’t want to spend your mind on mounting, you can go to a special mounting shop to mount. Not only do you provide a variety of frames and cardboards of colors, but also a variety of matching solutions for choice. The card paper machine provides personalized card carved flowers, and the cross stitch paper machine comes with a variety of carved patterns to prepare guests to choose from.

color

In the combination of cross -stitch, cardboard, and outer frames, the neighboring color in the “reconnaissance and contrast” in art science is generally used. A small part of the zero degree comparison and strong contrast are used. In general, the comparison of cross -stitch, cardboard, and outer frames is not very strong. In this way, the cross -stitching cross -stitch is harmonious and unified. Differences can achieve the role of setting, such as green cross stitch can choose yellow cardboard or frame; there are also stuck paper, the color of the outer frame, and the color of the cross stitch to form a clear contrast. For example, red cross stitch can choose black cardboard or frame.

Pattern

The form of cardboard and frame must be unified with the content of the cross -stitch. The shape and carving can strengthen and the theme of the cross -stitch expression. A good lining cardboard and frame itself are a good crafts. Such as a simple line painting. Use the simplest mounting method, such as frameless. Or only the shape is simple, such as a straight frame. There is no need to carve too much tricks to add cardboard, just a single layer. Classical cross stitch pictures can be mounted more complicated, double -layer cardboard. The outer frame is used in European or court -style styles, such as the golden platinum frame with complex patterns. There are also some complicated patterns of abstract painting cross -stitching, static flower cross -stitching, can be mounted with glass suspension, allowing cross -stitch and cardboard to open the distance to show a three -dimensional sense.

Overall style

In terms of cross -stitch content, if it is European style, you must choose a traditional European frame and lining cardboard style, and the pattern with Chinese characteristics. Traditional Chinese window decorations and so on.

Soft mounting

In the cross -stitch mounting technology, soft mounting is the same as Chinese traditional calligraphy and painting mounting methods. It is enough to mount the cross -stitching embroidered on the special materials. This is soft mounting.

Features of soft mounting cross -stitching: In the cross -stitch mounting technology, the embroidery crafts of soft mounting methods require short pin angles, and their work must be particularly fine. Of course, no matter the size, it can be rolled up in the special tube. It is convenient to carry, easy to transport, and should be used for collection.

Mount

Hard mounting cross -stitch is the most commonly used cross -stitch mounting technology in the process of modern mounting cross -stitch finished products. After the glue is completely sticky, remove the turtle, with the decorative cardboard, and then install the frame.

Identify

Evaluating the quality of a cross stitch is not easy. The embroidery line is the most critical factor. You can consider the following key aspects.

First of all, it depends on whether the material is genuine. There are imported cloths, lines, stitches, etc., as well as domestic ones. The main cost of materials is cloth. Various prices are different. Only comparison or finding experience can be identified. The simpler way is to look at the packaging of packaging and various materials.

Secondly, the color of the line is the most critical factor in the effect of the cross -stitch finished product. The color must be pure, so that the pure color can make the entire embroidery achieve the best effect. The color is pure and difficult to distinguish, and it is not the color that looks like the color. This is the two concepts in itself. The comparison method is easy to distinguish, using the same number of lines and the same superb technology to embroider the same picture.

Third, the coloring of the embroidery line puts a dark embroidery line in the sun exposure. After a month, you will gain a lot after you look at it. Whether to pass environmental certification, good cross -stitch cloth and wire materials, and environmental protection of printing and dyeing materials. After all, we are holding on our hands all day, and we will hang home all day after mounting, health first! Hope you can gain.

Those with poor quality of cross -stitches can be divided into a few types:

(1) The cross stitch cloth is too soft and the grid is crooked.

(2) The abrasion resistance of the cross stitch thread is too low, and the embroidery will have severe hair or broken lines.

(3) Cross -stitch threads will fade and fade.

(4) The printing of the cross stitch is blurred, and it is difficult to see or even see it.

(5) Insufficient cross -stitch lines.

(6) The color or picture of the embroidery is too large to enter and exit the cross -stitch pictures.

Benefit benefits

There are indeed many real benefits of the cross -stitch of modern craftsmanship, such as simple and easy to learn, the materials are easy to buy, the material is easy to buy, the patience and concentration can be cultivated. Let’s briefly introduce them.

1. Embroidery method is easy to learn. Simply put, as long as the marking on the drawing, find the corresponding line number, find the grid that should be embroidered on the cloth, embroidery a full needle (that is, a “X”) in the grid, which is a bit like a button button. Essence Moreover, the direction of the pressure line should be consistent to embroider exquisite works. People without experience in sewing can learn only two minutes. It is too easy to get started for ten or eight years compared to the traditional Chinese embroidery.

2. Cross -stitch materials are easy to buy. Many specialty stores have appeared in the market, which are domestic and imported materials abound, Ren Jun purchased. Relatively speaking, imported materials are better and the price is more expensive. As long as you choose your favorite pattern, the clerk will be equipped with cross -stitching needles, cross stitch, cross -stitching cloth in the description on the cross stitch drawings. At least one thread must buy one. The advantage is that this time the embroide The end of the line can be used for later use. Or you can also buy a suit, that is, the cloth, line, needle, and drawings are packed and sold together. Its advantage is that it is cheaper to buy one at one time, but the remaining lines are generally not available in the future because different sets of the target are marked on the target of different sets. The line number is not uniform.

3. It can relieve work and life pressure. During the embroidery process, people will be immersed in the fun brought by embroidery, and they will forget the troubles of work and life unknowingly. After my own stitches, accumulated, and unremitting efforts, the joy brought by the moment of completing the work could not replace anything.

4. Cultivate patience and concentration. When embroidery, if you do not concentrate, it is easy to embroider the wrong grid. If the front is not embroidered, it will affect the back. Embroidery is a time that takes time. If you have no patience and embroidery for a period of time, then you can never produce your works. Therefore, cross -stitch can cultivate patience and people’s concentration.

5. It can pass love. In today’s society, many people are busy with their lives. Most people only buy some ready -made products to give them to relatives and friends, and gifts made by themselves are precious. Cross -stitch is generally made by itself, and because of its exquisite finished products, it is often unexpected results to give relatives and friends as a gift.

6. You can make friends. You can use the drawings you have used or the remaining embroidery lines to exchange with others, and you can also communicate with each other’s experience.

7. If you draw the old paper, you will change. The embroidered cloth is dirty. Wash it with water. After drying, it is a new picture.

8. Suitable for all ages, children can cultivate hands -on ability, older can enrich amateur life, cultivate sentiment …

Cross -stitch market

According to statistics, there were only less than ten domestic cross -stitch manufacturers before 2005, and the number statistics statistics in November 2009 were 481 (only the industrial and commercial registration, excluding OEM production).

The rapid increase in cross -stitch manufacturers has an irresistible relationship with the rapid rise of the cross -stitch industry. It is also authoritative statistics to the Cross -Xangxiu output value of 3.5 billion yuan in 2009. It is expected that the 2010 cross stitch industry will continue to expand. The output value is expected to exceed 5 billion yuan. RMB.

In addition to the appreciation of the cross, you can also give away relatives and friends, and you can sell excess to others for remuneration. And with the improvement of people’s living standards, the demand is getting larger and larger, especially the cross -stitch containing traditional Chinese colors, such as “Qingming Shanghe Tu”, “Red Mansion Qunfang Pictures”, “Qinqi Calligraphy and Calligraphy”, “Gold Man”, “Rising Sun East Shengsheng” 》 It is the object of pursuit and love for collectors at home and abroad. In general, the larger the cross -embroidery size, the more exquisite the value of the embroidery workers, especially the price of boutiques abroad is very high. Based on the price of the embroidery workers less than tens of thousands, the average price of more than two meters is ten. In case of a meter, a 22 -meter -long “River Map of the Qing Dynasty” was acquired by the Rockefeller Foundation in the United States for 3.88 million high prices. There are as many as 814 people in this “Qingming Shanghe Tu”, with different expressions; there are various buildings such as bridges, shops, foot shops, restaurants, residential houses, and city gate buildings. Passenger and cargo ships, vivid images; 180 trees and 83 livestock, running through the entire picture, lifelike; and furniture, food, clothing … embellishment. Looking into the entire picture, starting from the countryside, gradually moving along the Changchang River, and remitting a rich theme picture at the bridge. After a peaceful picture, the sudden and majestic city tower suddenly emerged, making people enter a new realm, far -reaching and shocking. The continuing picture stopped abruptly in front of a large mansion, which made people feel that the intention was endless.

RELATED POST

CPB skin key to the new clean skin series Jingyao listing

CPB skin key to the new clean skin series Jingyao listing In December 2021, Temple -level beauty luxury, Clé de…

Sichuan 5 -month -old baby girl’s kidney has been full of stones, but because of the parents did this!

Sichuan 5 -month -old baby girl's kidney has been full of stones, but because of the parents did this! 4…

What is the penetrating agent JFC and what are the functions of JFC?

What is the penetrating agent JFC and what are the functions of JFC? The penetration agent is a kind of…

Haopin Shandong | Go abroad with Silk Steel, Hao Ke technology has changed “weaving” into “intelligent manufacturing”

Haopin Shandong | Go abroad with Silk Steel, Hao Ke technology has changed "weaving" into "intelligent manufacturing" Reporter Kang Yan…