In a bathroom, there are many hardware accessories, and each small hardware accessory has a very large role. The triangular valve can control water pressure and water flow, which is a very important accessory in the bathroom. Today, I will tell you what brand and triangular valve classification is introduced in the triangle valve.
What brand of triangle valve is
Once the triangle valve is broken, it will cause huge trouble to life. Therefore, when buying the triangle valve, consumers must choose the brand. Jiu Mu, Emperor Lang, Yajie, Ya Zhijie, Huayida, Yinjing, Moen, Tianlang, Laolsdam, Kohler, etc. are all good triangular valve brands.
Triangular valve classification introduction
1. Triangular valve is distinguished according to hot and cold
“Cold” and “Hot” (distinguished by blue and red signs) The same model of the same manufacturer of the same manufacturer, most of the materials in the same model of the same model. It is to distinguish which hot water and which is cold water. Only part of the low -grade slow triangle valve is a rubber ring valve core. The material of the rubber ring cannot withstand 90 degrees of thermal water, and it needs to be hot and cold.
2. Triangular valve is distinguished according to the opening method
“Hurry up” and “slowly open”. Fast opening refers to the fast opening and closing valve at 90 degrees. Slow opening refers to the 360 -degree rotating angle valve handle to open and close the valve. Basically, it is basically used.
Third, the triangular valve is distinguished according to the valve core
Ballical valve core, ceramic valve core, ABS (engineering plastic) valve core, alloy valve core, and rubber rotating valve core.
1. The spherical valve core: The advantage of the spherical valve core is that the caliber is larger than the ceramic valve core, and the water pressure and flow will not be reduced. of. The advantages of chrome -plated hardness are highly abrasion -resistant and long service life; avoid copper green.
2. ABS (engineering plastic): The cost of plastic valve core is low, and the quality is not guaranteed.
3. Ceramic valve core: The advantage of the ceramic valve core is that the feel of the switch is smooth and light. Suitable for families, long service life, and high cost.
4, rubber rotation valve core: It is now eliminated because it is very time -consuming and laborious. At present, the family rarely uses this material valve.
Fourth, triangular valve is distinguished by shell material
Bronze, alloy, iron, plastic.
Bonor: Easy to process, strong plasticity, hardness, strong anti -torque and torque.
Alloy: Low cost, the disadvantage is that the anti -torque resistance is low, and the surface is easy to oxidize.
Iron: easy to rust, pollution water. It is not recommended to use in today’s society with environmental protection and low carbon.
Plastic: low cost and not easy to use in the northern that is extremely cold.
Through the introduction of the brand of the triangle valve and the classification of the triangular valve introduced by the above editors, everyone knows what good brands and classifications of the triangle valve. I hope the content introduced by the editor can help you choose better. Buy triangle valve.