Five thousand yuan golf DIY preparation, article three: chassis

This content comes from@What is worth buying app, the point of view only represents the author himself | Author: early wandering

First of all, pay for you to see the officials, say four good articles, the third time is a bit of a long time. One is that because the site is really boring, everyone’s interest cannot be mentioned. Second, there have been some recent changes. The chance of returning to my hometown has become less.

I have also seen each other. Recently, I am tossing some small things that can be done in the basement. Interested students can also move to search for the “Self -cultivation of Trash” to renovate and repair old objects and tools.

But everyone can rest assured that these 5,000 yuan cars are still in my hands. It has been opened for two years, about 28,000 kilometers. The state is also good. In the mentality of tossing, it is just a repair and supplement.

五千块的高尔夫DIY整备,篇三:底盘篇

This time, the site part was compiled. Because of the time, some of them were made in the outside shop, and only the parts were tossing themselves below.

Special reminder: The chassis part involves safety, and it is not recommended to toss it yourself. Dangerous movements are for reference only.

No chassis chart of the golf 4 was found on the Internet. Borrowing the Corolla chassis for reference, the structure is similar. The front McPherson rear torque beam.

五千块的高尔夫DIY整备,篇三:底盘篇

status quo

五千块的高尔夫DIY整备,篇三:底盘篇

The lower arm ball header jacket cracks

五千块的高尔夫DIY整备,篇三:底盘篇

The lower arm glue sleeve cracks

五千块的高尔夫DIY整备,篇三:底盘篇

Step tie ball head glue sleeve cracking

It looks a little bit miserable

五千块的高尔夫DIY整备,篇三:底盘篇

The accessories of the accessories are done

Golfe

五千块的高尔夫DIY整备,篇三:底盘篇

Lower arm

五千块的高尔夫DIY整备,篇三:底盘篇

This time, I replaced the lower arm, lower arm ball head, and direction of the ball head.

五千块的高尔夫DIY整备,篇三:底盘篇

Disassemble

Open the wrench on the 19th

Generally, the ball head screw is still difficult to get down the ball head. It is thought that behind the screw of the ball head is a cone -shaped, inserted into the horns. It will be difficult to disassemble for a long time. At this time, the car repair master will use the sledgehammer at this time. I bought a special tool deliberately here.

Special tool for disassembling ball head

五千块的高尔夫DIY整备,篇三:底盘篇

Just twist the screws on this way

Do

五千块的高尔夫DIY整备,篇三:底盘篇

The other side is connected to the direction machine tie rod

五千块的高尔夫DIY整备,篇三:底盘篇

New and old comparison here can see that the latter screw is cone -shaped

Put on the new ball, and after you change it here, remember to make four -wheel positioning

五千块的高尔夫DIY整备,篇三:底盘篇

Next, start removing the branches, remove the small balanced lever first, and then twist the screws in turn.

I encountered an interesting problem here. This long screw cannot be taken out.

五千块的高尔夫DIY整备,篇三:底盘篇

Strong miracle directly stretched out

五千块的高尔夫DIY整备,篇三:底盘篇

Comparison of new and old ones

五千块的高尔夫DIY整备,篇三:底盘篇

Put on a new lower arm

Both the lower arm and the ball are done

Replace the brake pads

One day, I found a harsh sound of the brakes. Get off and check it. The rear brake pads have been completely worn. Two pairs of rear brake pads were purchased online and opened on weekends.

五千块的高尔夫DIY整备,篇三:底盘篇

Xiaobao watching

五千块的高尔夫DIY整备,篇三:底盘篇

Safety reminder: Be sure to use a security support to lift the car, do not completely believe in the jack. You can install a security support and let the jack use a little bit of force, after all, it is completely most important.

五千块的高尔夫DIY整备,篇三:底盘篇

Security support

The one in the lower right corner is what I am using

五千块的高尔夫DIY整备,篇三:底盘篇

You can see the brake caliper when you remove the tire

五千块的高尔夫DIY整备,篇三:底盘篇

Remove the calibration screws to open the calibration and remove the brake pads

This occasion has been worn out

I forgot to take pictures later. As the brake pads wear, the piston in the brakes of the brakes will slowly come out to ensure that the efficacy of the brakes will not be reduced. Each changing brake pads will increase the thickness, so the brake piston should be pressed back into the caliper. The pressure brake pump needs to be used for special tools. Here we borrow a web.

五千块的高尔夫DIY整备,篇三:底盘篇

Borrowing the webmap, infringement delete

In addition to these, the chassis part is also replaced by the ball cage cover, because the screws are really incompatible, and finally go to the car repair shop to do it.

This screw is too difficult to do

五千块的高尔夫DIY整备,篇三:底盘篇

It is still not possible to buy a special sleeve

Twisted twist. Essence Essence

五千块的高尔夫DIY整备,篇三:底盘篇

It is the dark there, it is the inner ball cage of the transmission shaft, which connects the transmission to the wheel transmission power

Wheel alignment

五千块的高尔夫DIY整备,篇三:底盘篇

Device

This will ask professionals to invite professionals

五千块的高尔夫DIY整备,篇三:底盘篇

Egg

I had a big operation for Golf 4. I couldn’t do it this time, and I came out to change the personality after a week. You can only understand it, you understand naturally.

五千块的高尔夫DIY整备,篇三:底盘篇

That’s all

五千块的高尔夫DIY整备,篇三:底盘篇

Summary: There are relatively few movements in the low disk. Recently, I have time to sort out as soon as possible. The interior is completely disassembled. The seats have been disassembled and the original car has been removed for 15 years. Some plastic parts are sprayed.

Interested students can also pay attention to the “self -cultivation of garbage guys” in my station B. Together with small yellow croakers, all kinds of interesting garbage, refurbished and repaired.

五千块的高尔夫DIY整备,篇三:底盘篇

Thank you for your attention ~

五千块的高尔夫DIY整备,篇三:底盘篇

Little Cross -car now looks like

The lower arm ball header jacket cracks

五千块的高尔夫DIY整备,篇三:底盘篇

The lower arm glue sleeve cracks

RELATED POST

PORTS 1961 autumn and winter women’s clothing series “Reversing classics, elegant new solution”

PORTS 1961 autumn and winter women's clothing series "Reversing classics, elegant new solution" At 7 pm on February 16th, Beijing…

What can the wind turbine be retired? The engineer wants to turn the fan blades into a bridge

What can the wind turbine be retired? The engineer wants to turn the fan blades into a bridge In order…

Regarding the basic knowledge, purchase and maintenance of the battery battery, it is enough to watch a article.

Regarding the basic knowledge, purchase and maintenance of the battery battery, it is enough to watch a article. Author of…

The necessity of dehumidification of car raising skills, the simpler the more need to take care of it!

The necessity of dehumidification of car raising skills, the simpler the more need to take care of it! Love cars…